Free Download — Word (.docx)

Forklift Lift Plan Template

A free, editable lift plan template for counterbalance and rough-terrain masted forklift trucks, prepared by a CPCS Appointed Person with 35 years of construction experience. It covers the capacity check, route and floor checks, vehicle loading, hazards, method statement and briefing record. Need one written for you instead? Our forklift lift plans start from £200 + VAT with a 24–48 hour turnaround.

What the template covers

Eight pages, fifteen sections, ready to fill in on screen or print. Planned under LOLER 1998 Regulation 8, ACOP L113, ACOP L117 and the manufacturer's instructions.

1. Scope of work

Project, site, contractor, dates and where the work happens: warehouse floor, construction site or loading area.

2. Type of operation

Fork-carried load, fork-mounted jib, vehicle loading or machinery move, with what the template does not cover.

3. Truck details

Truck type, capacity plate, load centre, mast, thorough examination, PUWER inspection and daily pre-use checks.

4. Load details

Weight and its source, dimensions, centre of gravity and actual load centre, and load condition.

5. Capacity check

Rated capacity at the actual load centre and height, gross load, utilisation and a clear lift / do-not-lift result.

6. Forks and attachments

Fork rating and extensions, clamps and rotators, and a full section for fork-mounted jibs with an accessories schedule.

7. Ground, floor and route

Surface, gradients, suspended floors and ramps, front-axle load, overhead clearances and power lines.

8. Vehicle loading

Driver safe area, vehicle stability, load shift, restraint and loading-bay controls.

9. Personnel

Operator, slinger/signaller and marshaller, with card or training details and briefing ticks.

10. Hazards and controls

Fifteen forklift hazards already listed with control measures, plus blank rows for your site.

11. Method statement

An eleven-step sequence from pre-use checks to parking up, with space for site-specific steps.

12–15. Layout, emergencies, briefing and sign-off

A full-page layout box, emergency procedures, briefing signatures and authorisation.

When to use the template, and when to get help

The template suits most forklift lifting on site and in the workplace. Some jobs need more than a form: they need someone to check the numbers.

OperationTemplateWatch for
Palletised loads on standard forksSuitableLoad centre within the capacity plate figure
Loading and unloading lorriesSuitableDriver safe area, load shift, vehicle stability
Long, offset or awkward loadsSuitable with careCapacity at the real load centre, from the maker’s chart
Fork-mounted jib or hookSuitable with careCombined truck and jib capacity; trained slinger
Machinery movesGet it checkedConfirmed weight and centre of gravity; floor loading
Lifts over suspended floors or mezzaninesGet it checkedFront-axle load against the floor capacity
Two forklifts on one loadNot coveredNeeds a specific plan by a competent person
Lifting peopleNot coveredNever on forks; HSE guidance on exceptional use only

Important notes

A template is a starting point

Every lift is different. The person completing the template must be competent to judge the truck, the load and the site, and every capacity figure must come from the manufacturer's data for that truck and attachment. For machinery moves, jib lifts or lifts over suspended floors, consider our forklift lift planning service.

The rules behind it

LOLER 1998 (planning, and thorough examination of the mast, chains, forks and attachments at least every 12 months or per a written scheme), PUWER 1998 for brakes, steering and tyres, ACOP L113 and ACOP L117. BS 7121 is the crane code and is not used for forklift work.

Frequently asked questions

Do I need a lift plan for forklift operations?

LOLER 1998 requires every lifting operation to be properly planned by a competent person, and a forklift lifting or lowering a load is lifting equipment under LOLER. Routine pallet handling is usually covered by the employer’s risk assessment and safe system of work. A specific written plan is needed for out-of-the-ordinary work: loads near capacity, offset or long loads, machinery moves, fork-mounted jibs, lifts over suspended floors, or when a principal contractor asks for one.

Does this template work for any make of forklift?

Yes. It has fields for the make, model, serial number, capacity plate, load centre, mast type and attachments, so it works for any counterbalance or rough-terrain masted forklift sold in the UK. Every capacity figure must come from the manufacturer’s data for that truck and attachment.

Why does the template not use BS 7121 lift categories?

BS 7121 is the code of practice for the safe use of cranes. A forklift is not a crane, so the template is built on LOLER 1998, the ACOP L113 on lifting equipment, ACOP L117 on rider-operated lift trucks and the manufacturer’s instructions instead.

Who should complete a forklift lift plan?

A competent person who understands the truck, the load and the site. For higher-risk work such as machinery moves, fork-mounted jib lifts or lifts over suspended floors, many principal contractors expect the plan to be prepared by a CPCS or NPORS Appointed Person.

Want this written for your site instead? Plans from £200 + VAT, 24-48h turnaround

07803 808093

3 fields, 30 seconds. We reply within 4 working hours.

Delivered to us by email through our form provider and used only to answer you. No mailing list, no marketing. How we handle it.

Get the AP’s pre-submission checklist

The 22 checks a CPCS A61 Appointed Person runs before a lift plan is accepted — the same methodology we use on paid reviews. One page, printable for the site cabin.

Two fields, no newsletter. Delivered to us by email through our form provider and used only to send you the file and see which resources get used. How we handle it.

Call RickyWhatsApp