Lorry loader lift plan example: a HIAB lifting a welfare cabin off its bed
A 3D view from an RMT Solutions lorry loader lift plan (example job). A Fassi F545RA.2.26 loader crane, stabilisers down on mats, lifts a 2,145 kg welfare cabin off its bed on a 4-leg chain and sets it down behind the wagon at 10.15 m, at 52.1% utilisation of the Fassi duty chart.
The video is rendered from the same 3D model as the plan's drawings, so the machine, the radius and the load match the figures on the sheets.
The lift in figures
- Loader crane
- Fassi F545RA.2.26, behind-cab knuckle boom, working over the rear
- Load
- 16 ft welfare cabin, 2,145 kg (published weight)
- Gross load
- 2,190 kg including the 4-leg chain, direct to the four lifting points
- Duty
- 4,200 kg on Fassi chart DE15852 at the 10.15 m published duty point
- Utilisation
- 52.1%
- Set-up
- Stabilisers down on mats, exclusion zone barrier, loader crane operator and slinger / signaller
Utilisation is the gross load, including all the lifting accessories, divided by the capacity on the manufacturer's chart for that configuration and radius.
What the video shows
- 0:00The lift in 3D, drawn from an RMT lorry loader lift plan
- 0:05The loader crane: Fassi F545RA.2.26, behind-cab knuckle boom, stabilisers down on mats
- 0:10The load: a 2,145 kg welfare cabin, gross load 2,190 kg on a 4-leg chain to the four lifting points
- 0:16The duty check: 4,200 kg at 10.15 m on Fassi chart DE15852, 52.1% utilisation
- 0:21The exclusion zone barrier layout, loader crane operator and slinger / signaller
- 0:28Lift plans by a CPCS A61 Appointed Person
Every RMT lift plan comes with drawings like these
An elevation, an exclusion zone plan, a rigging drawing and 3D views, drawn to the machine's real dimensions and written by a CPCS A61 Appointed Person with 35 years in lifting operations.
More lift plan videos
Example job for illustration. It is not a site instruction or an approved plan for another lift: every lift needs a plan for the actual machine, load and site.