From steel model to safe lift: a steel frame planned in SteelCAD and lifted in 3D

How RMT Solutions takes a structural steel frame from model to lift plan in one joined-up process (example job, fictional site). The frame is modelled in SteelCAD, our own bespoke steel modelling software, and broken into four erection stages: columns, grid-line beams, then bay by bay. Each piece carries its mark, section and length into the steel schedule, lift weights come from the fabricator’s schedule, and every lift is checked against the Liebherr duty chart. The drawing engine then produces the elevation, plan, rigging and 3D views and a 4K film of each lift: a Liebherr LTM 1090-4.2 sets up on mats, the slinger hooks on to two load rings and walks clear, and each UB 406x178x60 is lifted, slewed and landed while erectors in boom lifts, harnessed and clipped on, bolt it up.

The video is rendered from the same 3D model as the plan's drawings, so the machine, the radius and the load match the figures on the sheets.

The lift in figures

Model
SteelCAD: 9 x UC 203x203x46 columns, 12 x UB 406x178x60 beams, 4 erection stages
Crane
Liebherr LTM 1090-4.2, working over the side, 30.0 m main boom, 22.5 t counterweight, on mats
Rigging
Two RUD VLBG-PLUS M20 load rings through the top flange, 2-leg chain
Gross load
760 kg including the rigging and the hook block
Lift A
17.1 m landing radius, 6.0 t published duty, 12.7% utilisation
Lift B
24.0 m landing radius, 4.4 t published duty, 17.3% utilisation

What the video shows

  1. 0:00From steel model to safe lift
  2. 0:10Modelled in SteelCAD
  3. 0:23Erection sequence
  4. 0:40Steel schedule and lift weights
  5. 0:58Crane duty check
  6. 1:18Lift plan drawings
  7. 1:294K briefing film: crane set-up
  8. 1:44The lift, landing and bolting
  9. 2:05Bay by bay
  10. 2:22Written and checked by a CPCS Appointed Person

Every RMT lift plan comes with drawings like these

An elevation, an exclusion zone plan, a rigging drawing and 3D views, drawn to the machine's real dimensions and written by a CPCS A61 Appointed Person with 35 years in lifting operations.

Example job for illustration. It is not a site instruction or an approved plan for another lift: every lift needs a plan for the actual machine, load and site.

Call RickyWhatsApp